Branch: GO Timbermart, East Garafraxa

Cabot 19458C Australian Timber Oil, Honey Teak, Liquid, 3.78L

3040243
Starting from
CAD 98.15 / GAL
/
Additional fees may apply
- +
Your collection branch is GO Timbermart, East Garafraxa
Compare

Cabot 19458C Australian Timber Oil, Honey Teak, Liquid, 3.78L

Item Code: 3040243
Cabot® Australian timber oil for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallow wood, cambara and merbau from the extreme Australian exposures. Australian timber oil penetrates deep into the dense, resin rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long oil alkyds for durability and pure South American tung oil for color depth and water repellency, Australian timber oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting UV absorbing surface rich with color and dimension. The result after years of development is an advanced technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before.
Manufacturer Minwax
Minimum quantity 4
  • Covers approximately 250-350 sq-ft/gal (23-33 sq-m) on smooth wood; 100-200 sq-ft/gal (30-60 sq-m) on rough wood
  • Do not apply indirect sunlight, to hot surfaces or when air or surface temperature is below 50deg F (10deg C) or may fall below
  • Penetrates deep, clean brushes and equipment with soap and water
  • Protect containers from freezing, for exterior use only
  • Specially formulated for decks, siding, fences, railings, steps and outdoor wood furniture
  • Unique blend of oils formulated to protect from extreme exposures
Cabot® Australian timber oil for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallow wood, cambara and merbau from the extreme Australian exposures. Australian timber oil penetrates deep into the dense, resin rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long oil alkyds for durability and pure South American tung oil for color depth and water repellency, Australian timber oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting UV absorbing surface rich with color and dimension. The result after years of development is an advanced technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before.

Specifications

UNSPSC Code

30.301.301

Weight

9.01lb

Height

7.63in

Width

6.63in

Length

6.63in

Applicable Materials

Mahogany, Teak and Other Premium Exotic Woods

Application Method

Stain Brush/Pad Applicator/Sprayer

Brand

Cabot

Category

Exterior Stains & Finishes

Compliance

VOC

Composition

Ethylene Glycol Monopropyl Ether, 3-Iodo-2-Propynyl Butylcarbamate 2-Butanone, Oxime, Cobalt Neodecanoate

Coverage

250 - 350 sq-ft/gal

Finish

Honey Teak

Flash Point

94 deg C

Form

Liquid

Packing Type

Can

Pigment

Trans-Oxide

Resists

Water and Mildew

Series

19400

Size

3.78 L

Specific Gravity

1.02

Standards

SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National

Type

Water Reducible

Usage

For Exterior Wood Decks, Siding, Railings, Fences and Outdoor Furniture

Vehicles

Long-Oil Alkyds, Tung Oil and Natural Linseed Oil

Viscosity

70 - 100 cP

VOC Content

<275 g/l

Cabot® Australian timber oil for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallow wood, cambara and merbau from the extreme Australian exposures. Australian timber oil penetrates deep into the dense, resin rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long oil alkyds for durability and pure South American tung oil for color depth and water repellency, Australian timber oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting UV absorbing surface rich with color and dimension. The result after years of development is an advanced technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before.

Specifications

UNSPSC Code

30.301.301

Weight

9.01lb

Height

7.63in

Width

6.63in

Length

6.63in

Applicable Materials

Mahogany, Teak and Other Premium Exotic Woods

Application Method

Stain Brush/Pad Applicator/Sprayer

Brand

Cabot

Category

Exterior Stains & Finishes

Compliance

VOC

Composition

Ethylene Glycol Monopropyl Ether, 3-Iodo-2-Propynyl Butylcarbamate 2-Butanone, Oxime, Cobalt Neodecanoate

Coverage

250 - 350 sq-ft/gal

Finish

Honey Teak

Flash Point

94 deg C

Form

Liquid

Packing Type

Can

Pigment

Trans-Oxide

Resists

Water and Mildew

Series

19400

Size

3.78 L

Specific Gravity

1.02

Standards

SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National

Type

Water Reducible

Usage

For Exterior Wood Decks, Siding, Railings, Fences and Outdoor Furniture

Vehicles

Long-Oil Alkyds, Tung Oil and Natural Linseed Oil

Viscosity

70 - 100 cP

VOC Content

<275 g/l

SEARCH ×

Search